Learn how to make your own wire basket from regular contributor, Michelle James.
DIY Custom Wire Basket
Have you ever been searching and searching for a basket to fit a particular space in your home, or organizing and you just cannot find the right size? It happens to me all of the time. So, I decided to learn how to make my own custom wire baskets.
DIY Custom Wire Basket:
If you would like to make your own wire baskets, here is what you will need.
- Hardware Cloth – you could use chicken wire too
- Tin Snips
- Needle nose pliers
- Sharpie Marker
- Straight Edge – I used a piece of wood
First, decide the length and the width of your basket. Mine needed to be 17 inches X 15 inches. Then, decide how tall it will be. I could only go 3.5 inches because the hardware cloth we purchased (for a different project) was only 24 inches wide. The 17 inches plus 7 inches equals the 24 inches. So, that was how tall I would make it.
Use the tin snips, and cut out a piece that is big enough for the sides and the bottom of the basket. My piece was 24 x 22 inches. This was the 17 x 15 bottom and the 3.5 inches on each side. (total of 7 inches for the sides)
I know…I don’t like math either but this is how we use it in real life. Good thing it isn’t any harder than that.
Then, you need to cut out the corners of this piece to form the sides that will be bent up to a vertical position.
Start by using a sharpie and marking the corner point. My sides will be 3.5 inches; so, I measured 3.5 inches from the sides to find the corner point.
It is important to cut one side of each corner close to the cross wire and the other side away from the cross wire, so the little wires are hanging out. You will be using these little wires to wrap and attach the side corners together.
Bend up the sides using a straight edge of some sort to help keep it folding in a straight line.
Now, get the needle nose pliers to wrap the small wires onto the cross wire of the opposite side. You will end up with this.
Mind ended up with a twist in it.
I tried and tried to get it to straighten out. I think a lot had to do with the size of the basket. A smaller one may not be so bad. I was able to fix it most of the way, but I knew it would be holding either fabric scraps or magazines. So, I knew it would not show when it was on the shelf. And, it doesn’t. Here is the final result in the organizer cabinet I made from the old 70’s cassette, cd and vhs holders. I love these and look for them now.
I hope you enjoyed this tutorial and will try to make your own wire baskets. They are pretty easy, but be sure to wear your gloves.
I may still make a liner for this basket. I think it would look really nice.
Have a great day,
Visit Michelle at her blog, Michelle James Designs!
Share using our Hashtag!
Leave me a comment… I’d love to hear from you!
Sign up today, and don't miss anything! Enjoy EXCLUSIVES, FREEBIES, and FUN.
Contact Lorelai at Lorelai@LifeWithLorelai.com
13 thoughts on “Make A DIY Custom Wire Basket”
What a great idea! We have some of that same wire left over from another project – time to get to work!! 🙂 #HomeMattersParty
Wow that is a great solution for custom storage. I never would have thought in a million years I could make a wire basket, but this totally makes sense. I even have wire snips! #HomeMatterParty
You rocked it with this Michelle! I would love to make some of these! Thanks for sharing #HomeMattersParty
Wow, I love how this wire basket turned out. I am sure this is a great alternative for the expensive ones. #HomeMattersParty
What cool idea and think about how many blog posts you can craft using this basket as building point. #homematterparty
I love this idea. This way you can make a custom size. It is a nice look.
IT really is a great project that will fit your own specified size needs. 🙂
I love these baskets!! I am going to have to make some of these when I start organizing and redoing our RV!!!
I have some leftover hardware cloth from our garden project. Now I know what I can make with it. Thanks. #HomeMattersParty
This is such a budget friendly way to make baskets, and in custom sizes, too. What a great idea, thanks for the step by step directions. #HomeMattersParty
great tutorial, I have a few place where making my own baskets would be the perfect solution. I love the cassette drawers made over too! #HomeMattersparty