Cat Urine Cleaning Solution
Prep time
Total time
from: Life With Lorelai
Type: Cleaning
Ingredients:
- 16 0z - 3% Hydrogen Peroxide (if using 6% H2O2, dilute 50/50 with water)
- 1 Teaspoon mild Dishwashing Liquid
- 1 Tablespoon Baking Soda
Directions:
- Remove as much stuffing or padding, upholstery coverings, etc., as you can.
- Completely Soak the saturated areas (plus a little more for good measure) with cold water.
- Use clean white cloths or paper toweling to pat dry the area. Use deep pressure to draw as much of the urine out as possible. Do not rub or scrub.
- If your padding is removable, soak with water and squeeze it out good.
- When you have removed as much cat urine as you can, Mix the cleaning solution (H2O2, liquid soap, baking soda).
- Wearing gloves, immediately saturate the areas with the solution. Use a white clean cloth to help you squeeze the cleaner into hard-to-reach places. (Place your padding in a large sink or tub, and soak thoroughly).
- Once everything is fully soaked through, allow the cleaning solution to stand for a minimum of 15 minutes before sopping up as much liquid as you can.
- Let air dry completely. This may take a while, maybe even a day or two--do not rush the drying.
- Then, vacuum.
Notes
1. DO NOT mix this until you are ready to apply it. Hydrogen Peroxide stays active for only 15 minutes.
2. DO TRY this on a small, inconspicuous area to be sure it is color safe on your upholstery, carpet, etc.
3. USE gloves to protect your hands.
2. DO TRY this on a small, inconspicuous area to be sure it is color safe on your upholstery, carpet, etc.
3. USE gloves to protect your hands.
Recipe by Life With Lorelai at https://lifewithlorelai.com/2016/04/05/fresh-step-litter-master-diy-cat-toy/